MG Chemicals 842AR-150ML

Super Shield™ Silver Conductive Paint, 150ml Can

842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion-resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, and PVA. It provides superior high-frequency shielding. It also provides strong corrosion resistance and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board-level applications.

  • Provides superior EMI/RFI shielding over a broad frequency range
  • Strong corrosion resistance
  • Mild solvent system, safe on polystyrenes
  • Does not contain toluene, xylene, or MEK
USD 814.85

Cured Properties

  • Resistivity: 1.2 x 10-4 Ω·cm
  • Surface Resistance @ 50 µm: 0.050 Ω/sq
  • Salt Fog Resistance @ 35°C, 96 h: Excellent
  • Service Temperature Range: -40 - 120°C

Usage Parameters

  • Recoat Time: 3 min
  • Cure Times:
    • 24 h @ 22°C
    • 30 min @ 65°C
  • Recommended Film Thickness: 50 µm
  • Minimum Film Thickness: 25 µm
  • Theoretical Coverage @ 2 mil: 680 cm2 (based on 50% transfer efficiency)

Uncured Properties

  • Viscosity @ 25°C: 80 cP
  • Density: 1.38 g/mL
  • Percent Solids: 38 %
  • Shelf Life: 3 y
  • Calculated VOC: 361 g/L
Más información
SKU I512068
Modelo del fabricante 842AR-150ML
Marca MG Chemicals
ESD certificado
Volumen 150ml
¡Hemos encontrado otros productos que le pueden gustar!
©Production Automation Corporation. All Rights Reserved.