Permabond

UV681 Tack-Free Coating UV-Curable Adhesive, Clear

In Stock

Permabond® UV681 has been developed for use as a coating. It is ideal for coating electronics (such as conformal coating) to protect against environmental and vibrational damage. The optically clear / tack-free formulation also makes this product particularly suitable for coating smart card microchips amongst various other applications. Its low viscosity ensures an even, bubble-free coating and high-temperature resistance allows it to resist wave soldering.

Cure on demand
Low viscosity for good coverage
Tack free
Fast curing with low-power lamps
100% solids, no solvents

Tan bajo como USD 260.85

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond UV681 Technical Data Sheet

Detalles

Más información
Código PAC	C100364
Marca	Permabond
Tipo	Adhesivo UV

Más información

Physical Properties of Uncured Adhesive

Chemical composition: Acrylate
Appearance: Colourless
Viscosity @ 25°C: 80-120 mPa.s (cP)
Specific gravity: 1.1

Typical Curing Properties

Typical fixture time*
- Low power 4mW/cm² battery lamp: 7 secs
- LED 100mW/cm² lamp: 2 secs
- UV light guide 30W/cm²: 1 sec
Tack free time
- Low power 4mW/cm² battery lamp: 15 secs
- LED 100mW/cm² lamp: 5 secs
- UV light guide 30W/cm²: 1-2 secs
Cure wavelength: 320 - 420 nm**

*The cure time depends on the power of the UV lamp, its spectral output, the distance between the lamp and the components, and the transmission characteristics of the substrates.

**LED UV lamps have a narrow range of spectral output. It is important to check suitability with Permabond to match the LED lamp's peak wavelength with that of the adhesive's photoinitiator to ensure optimal adhesive cure.