Momentive RTV167-85ML

High-Strength Electronics-Grade Moisture Cure Single Component Silicone Paste RTV Sealant, Gray, 85ml Tubes

(Case of 12)

RTV167 adhesive sealant from Momentive Performance Materials is a one-component, ready-to-use Electronics-Grade silicone sealants. It will cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature.

Non-corrosive to electronic metals, including copper and brass
Low-odor cure, releasing an alcohol vapor from the sealant surface during cure
UL Recognition. Recognized by Underwriters Laboratories, Inc. under their Component Recognition Program (UL File No. E-36952)
Retains elastomeric properties for long periods at temperatures from -60°C (-75°F) to 205°C (400°F) and for short periods up to 260°C (500°F)
One component
Cure at room temperature
Excellent electrical insulation properties
Excellent resistance to moisture, dust, dirt, UV, oz.one, and chemical

USD 1,350.96

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Momentive RTV160 Series Technical Data Sheet

SDS/MSDS Sheets

Momentive RTV167 Safety Data Sheet

Detalles

Typical Physical Properties

Typical Uncured Properties

Color: Gray
Consistency: Paste
Specific Gravity: 1.12
Application Rate, gm/min: 180
Tack-Free Time, hours: 4

Cured Properties⁽¹⁾

Mechanical
- Hardness, Shore A: 37
- Tensile Strength, kg/cm² (lb/in²): 56 (800)
- Elongation, %: 600
- Peel Strength, kg/cm (lb/in)⁽²⁾: 10 (80)
Electrical⁽³⁾
- Dielectric Strength, kv/mm (v/mil): 20 (500)
- Dielectric Constant @ 60 Hz: 2.8
- Dissipation Factor @ 60 Hz: 0.0026
- Volume Resistivity, ohm-cm: 3 x 10¹⁵
Thermal⁽³⁾
- Brittle Point, °C (°F): -60 (-75)
- Maximum continuous operating temperature, °C (°F): 204 (400)
- Maximum intermittent operating temperature, °C (°F): 260 (500)
Additional Information⁽³⁾
- Thermal Conductivity, cal/sec/cm2, °C/cm (Btu/hr/ft2, °F/f): 0.0005 (0.12)
- Coefficient of Expansion, cm/cm, °C (in/in, °F): 27 x 10^-5 (15 x 10^-5)

(1) Cure time 7 days at 25°C (77°F), 50% relative humidity.
(2) 1 in. x 8 in. stainless steel screen at 180° pull angle.
(3) Information is provided for customer convenience only. Properties are not tested on a routine basis.

Más información