Momentive RTV162

Electronics-Grade Moisture Cure Single Component Silicone Glue RTV Sealant

In Stock

RTV162 adhesive sealant from Momentive Performance Materials is a one-component, ready-to-use Electronics-Grade silicone sealants. It will cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature.

Non-corrosive to electronic metals, including copper and brass
Low-odor cure, releasing an alcohol vapor from the sealant surface during cure
UL Recognition. Recognized by Underwriters Laboratories, Inc. under their Component Recognition Program (UL File No. E-36952)
Retains elastomeric properties for long periods at temperatures from -60°C (-75°F) to 205°C (400°F) and for short periods up to 260°C (500°F)
One component
Cure at room temperature
Excellent electrical insulation properties
Excellent resistance to moisture, dust, dirt, UV, oz.one, and chemical

Tan bajo como USD 591.24

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Momentive RTV160 Series Technical Data Sheet

SDS/MSDS Sheets

Momentive RTV162 Safety Data Sheet

Detalles

Más información
Código PAC	C100322
Modelo del fabricante	RTV162
Marca	Momentive

Más información

Typical Physical Properties

Typical Uncured Properties

Color: White
Consistency: Spreadable
Specific Gravity: 1.09
Application Rate, gm/min: 350
Tack-Free Time, hours: 4

Cured Properties⁽¹⁾

Mechanical
- Hardness, Shore A: 35
- Tensile Strength, kg/cm² (lb/in²): 38.2 (550)
- Elongation, %: 400
- Peel Strength, kg/cm (lb/in)⁽²⁾: 7.2 (40)
Electrical⁽³⁾
- Dielectric Strength, kv/mm (v/mil): 18 (450)
- Dielectric Constant @ 60 Hz: 2.8
- Dissipation Factor @ 60 Hz: 0.001
- Volume Resistivity, ohm-cm: 3 x 10¹⁵
Thermal⁽³⁾
- Brittle Point, °C (°F): -60 (-75)
- Maximum continuous operating temperature, °C (°F): 204 (400)
- Maximum intermittent operating temperature, °C (°F): 260 (500)
Additional Information⁽³⁾
- Thermal Conductivity, cal/sec/cm2, °C/cm (Btu/hr/ft2, °F/f): 0.0005 (0.12)
- Coefficient of Expansion, cm/cm, °C (in/in, °F): 27 x 10^-5 (15 x 10^-5)

(1) Cure time 7 days at 25°C (77°F), 50% relative humidity.
(2) 1 in. x 8 in. stainless steel screen at 180° pull angle.
(3) Information is provided for customer convenience only. Properties are not tested on a routine basis.