Permabond

UV648 Non-Drip Plastic Bonding UV-Curable Adhesive, Clear

In Stock

Permabond® UV648 is a UV-curing adhesive developed for use on plastics. It has superb adhesion to acrylic and contains a long-wavelength photoinitiator to allow it to cure through UV-stabilised plastics. This adhesive can also be used to bond glass, metals, and other materials. UV648 cures to give a colourless bond so is ideal for applications where aesthetic appearance is vitally important.

Cure on demand
Non-drip
High shear strength
Fast curing with low-power lamps
100% solids, no solvents
Excellent adhesion to plastics

Tan bajo como USD 284.23

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond UV648 Technical Data Sheet

Detalles

Más información
Código PAC	C100362
Marca	Permabond
Tipo	Adhesivo UV

Más información

Physical Properties of Uncured Adhesive

Chemical composition: Urethane methacrylate
Appearance: Colourless, clear
Viscosity @ 25°C:
- 20rpm: 20,000-40,000 mPa.s (cP)
- 2.5rpm: 120,000-180,000 mPa.s (cP)
Specific gravity: 1.1

Typical Curing Properties

Typical fixture time (acrylic)*
- Low power 4mW/cm² battery lamp: 10secs
- LED 100mW/cm² lamp: 4 secs
- UV light guide 30W/cm²: 2 secs
Cure wavelength 365 - 420 nm**

*The cure time depends on the power of the UV lamp, its spectral output, the distance between the lamp and the components, and the transmission characteristics of the substrates.

**LED UV lamps have a narrow range of spectral output. It is important to check suitability with Permabond to match the LED lamp's peak wavelength with that of the adhesive's photoinitiator to ensure optimal adhesive cure.

Typical Performance of Cured Adhesive

Overlap shear strength (ISO4587)
- Polycarbonate >7 N/mm² (>1000 psi)*
- Acrylic >4 N/mm² (>600 psi)
- PET >4 N/mm² (>600 psi)*
Tensile strength (ISO37): 11 N/mm² (1600 psi)
Refractive index: 1.490
Elongation at break (ISO37): >70%
Hardness (ISO868): 50-65 Shore D
Dielectric strength: 25-30 KV/mm
Dielectric constant 1MHz@25°C: 4
Water absorption (ISO62) 2 hours in boiling water: <3.5%