Permabond

MS359 Non-Sag Modified Epoxy MS Polymer Adhesive, 290ml Cartridge

In Stock

Permabond® MS359 is a single-part, moisture-curing MS polymer adhesive. It is ideal for use on a wide variety of substrate materials including metals, plastics, and composites. It is ideal for exterior construction applications (e.g. frames and fascias) as it has excellent resistance to weathering.

Free from solvents, isocyanates, silicones, and PVC compounds, non-corrosive
Cures at room temperature
No mixing required
Can be painted after curing
Suitable for a variety of substrates
Primer free
Easy to apply
Versatile - weather resistant

Tan bajo como USD 34.53

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond MS35 Technical Data Sheet

Detalles

Más información
Código PAC	C100405
Marca	Permabond
Tipo	Epoxi sencillo

Más información

Physical Properties of Uncured Adhesive

	Gray	Clear
Chemical Composition	MS-Polymer	MS-Polymer
Appearance	Gray	Clear, thixotropic paste
Viscosity @25°C	5rpm: 1,500,000-2,500,000mPa.s (cP) 1rpm: 4,500,000-9,000,000mPa.s (cP)	5rpm: 800,000-1,500,000 mPa.s (cP) 1rpm: 3,200,000-4,200,000 mPa.s (cP))
Specific Gravity	1.5	1.1

Typical Curing Properties

Curing mechanism: Humidity
Skin over time: 10-20 minutes
Cure rate Approx.: 4mm / 24 hours

Typical Performance of Cured Adhesive

	Gray	Clear
Shear strength (ISO4587)	Steel: 2-3 MPa (290-440psi) Aluminium: 2-3 MPa (290-440psi) Zinc: 2-3 MPa (290-440psi) PVC: 2-3 MPa (290-440psi) Polycarbonate: 1-1.5 MPa (150-220psi) Polystyrene: 1-1.5 MPa (150-220psi) Wood: 2-3 MPa (290-440psi)
Tensile strength (ISO37)	2-3 MPa (290-440psi)	0.7-1.5 MPa (100-200psi)
Elongation at break (ISO37)	150-350%	80-100%
Hardness (ISO868)	45-60 Shore A	40-50 Shore A