Permabond

LM113 Anaerobic Threadlocker, Purple

In Stock

Permabond® LM113 Threadlocker is a medium viscosity product for locking small threaded fasteners, such as screws and bolts or hydraulic fittings that might require disassembly. Due to its thixotropic viscosity, the liquid adhesive will not run away from the application area. Permabond's LM113 Threadlocker cures reliably and fast on steel, cadmium, zinc, and other plated fasteners.

Prevents vibration loosening
Controlled off-torque
Full cure at room temperature
Low strength for easy disassembly
Lubricates threads for easier assembly
Provides corrosion protection
Superior environmental resistance
Environmentally friendly - 100% solids

Tan bajo como USD 14.23

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond LM113 Technical Data Sheet

Detalles

Más información
Código PAC	C100341
Marca	Permabond
Tipo	Hilo de rosca

Más información

Physical Properties of Uncured Adhesive

Chemical composition: Methacrylate esters
Appearance: Purple
Viscosity @ 25°C: 1,200 mPa.s (cP) Thixotropic
Specific Gravity: 1.1

Typical Curing Properties

Maximum gap fill: 0.15mm (0.006")
Maximum thread size: M20 (3/4")
Time taken to reach handling strength (M10 steel) @23°C: 15 minutes*
Full strength (M10 steel) @23°C: 24 hours

*Handling time at 23°C / 73°F. Copper and its alloys will make the adhesive cure more quickly, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10 alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

Torque strength (M10 steel ISO10964)
- Break 9 N·m (80 in.lb)
- Prevail 5 N·m (40 in.lb)
Shear strength (steel collar & pin ISO10123): 5 MPa (750 psi)
Coefficient of thermal expansion: 90 x 10^-6mm/mm/°C
Dielectric strength: 11 kV/mm
Thermal conductivity: 0.19 W/(m.K)