Permabond

HH131 High-Temperature Permanent Anaerobic Threadlocker, Red

In Stock

Permabond® HH131 is a very high temperature resistant, high strength anaerobic threadlocker and sealant. This material cures in the absence of air between tight-fitting metal parts. It is used for locking bolts, nuts, and screws that require permanent assembly. This material is best suited for applications requiring high-temperature resistance.

Vibration resistant
Very high strength
Excellent chemical resistance
Lubricates threads for easier assembly
High-temperature resistance

Tan bajo como USD 45.57

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond HH131 Technical Data Sheet

Detalles

Más información
Código PAC	C100337
Marca	Permabond
Tipo	Hilo de rosca

Más información

Physical Properties of Uncured Adhesive

Chemical composition: Acrylic
Appearance: Red
Viscosity @ 25°C:
- 2rpm: 23,000 mPa.s (cP)
- 20rpm: 7,500 mPa.s (cP)
Specific Gravity: 1.1
UV fluorescence: No

Typical Curing Properties

Maximum gap fill:
- 0.3mm (0.012")
- M56 (2")
Time taken to reach handling strength (M10 steel) @23°C: 15 minutes*
Time taken to reach working strength (M10 steel) @23°C: 3-6 hours
Full strength (M10 steel) @23°C: 24 hours

*Handling time at 23°C / 73°F. Copper and its alloys will make the adhesive cure quicker, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10 alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

Torque strength (M10 steel ISO10964)
- Break 27 N·m (240 in.lb)
- Prevail 54 N·m (480 in.lb)
Shear strength (steel collar & pin ISO10123): 17 MPa (2500 psi)
Coefficient of thermal expansion: 90 x 10^-6mm/mm/°C
Dielectric strength: 11 kV/mm
Thermal conductivity: 0.19 W/(m.K)