Permabond

ET505 Toughened Multipurpose Two-Part Epoxy, Clear/Amber

In Stock

Permabond® ET505 is a two-part, 1:1 mixable epoxy adhesive. ET505 is a semi-flexible toughened epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics, and some plastics and composites. Permabond ET505 forms tough bonds providing high peel resistance and high shear strength. The extended work life of this product allows for adjustment and makes it more suitable for larger applications.

  • Adhesion to a wide variety of substrates
  • Full cure at room temperature
  • Easy to apply
  • High shear and peel strength
  • Good impact strength
  • Good chemical resistance

*Static mixer included with 400mL Cartridge

Tan bajo como USD 16.52

Documentos técnicos

Product Info & TDS Sheets
Más información
Código PAC C100397
Marca Permabond
Tipo Epoxi de dos partes

Physical Properties of Uncured Adhesive

ET505A ET505B
Chemical Composition Epoxy Resin Amine Hardener
Appearance Colourless Amber
Viscosity @25°C 14,000-28,000 mPa.s (cP) 10,000-25,000 mPa.s (cP)
Specific Gravity 1.1 1.0

Typical Curing Properties

  • Mix ratio by volume: 1:1
  • Maximum gap fill: 2mm (0.08")
  • Usable / pot life @23°C: 1-2 hours
  • Handling time @23°C: 3-5 hours
  • Working strength @23°C: 24 hours
  • Full cure @23°C: 72 hours

Typical Performance of Cured Adhesive

  • Shear strength (mild steel)* (ISO4587): 18-21 N/mm2 (2600 -3000 psi)
  • Peel strength (aluminum) (ISO4578): 60-80 N/25mm (13-18PIW)
  • Hardness (ISO868): 65-75 Shore D
  • Elongation at break (ISO37): 5-10%
  • Glass transition temperature Tg: 40-50°C (104-122°F)
  • Dielectric strength: 15-25 kV/mm
  • Thermal conductivity: 0.35 W/(m.K)

*Strength results will vary depending on the level of surface preparation and gap.

¡Hemos encontrado otros productos que le pueden gustar!
©Production Automation Corporation. All Rights Reserved.