Permabond AA001610250B0101

HM161 Gap Fill Slip Fit Anaerobic Retaining Compound, Green, 250ml Bottle

Permabond® HM161 is a single-component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the 'air space' between parts and upon cure unitizes and retains the mated parts. Thus, it prevents their relative movement, eliminating wear, erosion, and pitting. HM161 cures to a tough cross-linked plastic that will prevent the corrosion of mated parts and provides excellent environmental and temperature resistance.

Speeds up production
Improves alignment
Strengthens joint
Simple one-part system
Excellent shear strength
Good environmental resistance

USD 187.90

Comprar 2 por USD 182.26 cada uno
Comprar 6 por USD 176.63 cada uno

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond HM161 Technical Data Sheet

Detalles

Physical Properties of Uncured Adhesive

Chemical Composition: Methacrylates
Appearance: Green
Viscosity @ 25°C: 2,000 mPa.s (cP)
Specific Gravity: 1.1
UV Fluorescence: Yes

Typical Curing Properties

Maximum Gap Fill: 0.25mm (0.01")
Maximum Thread Size: M30 (3/4")
Time taken to reach handling strength (M10 steel) @23°C: 10 minutes*
Full Strength (M10 steel) @23°C: 24 hours

*Handling time at 23°C / 73°F. Copper and its alloys will make the adhesive cure more quickly, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10 alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

Torque Strength (M10 steel ISO10964)
- Break 31 N·m (275 in.lb)
- Prevail 45 N·m (400 in.lb)
Shear Strength (steel collar & pin ISO10123): 24 MPa (3500 psi)
Coefficient of Thermal Expansion: 90 x 10^-6mm/mm/°C
Dielectric Strength: 11 kV/mm
Thermal Conductivity: 0.2 W/(m.K)