Permabond AA000510250T0101

LH051 Automatic Dispensing Anaerobic Thread Sealant, White, 250ml Tube

Permabond® LH051 Pipe Sealant with PTFE is specifically designed for those applications that require a good 'bottoming out' of pipe, fitting, or plug. The added lubricity helps in seating the part even with an interference fit/ As such, it is used in heavy-duty machinery e.g. compressors, hydraulics, and construction equipment. When used on soft brass parts, the lubricity may be too high at times, causing deformation of the part upon assembly. LH051 is also made flowable so that it can easily be applied with dispensing equipment. The particle size of the filler is very low so it can be used on most hydraulic systems without clogging hydraulic screens or valves. Permabond LH051 Pipe Sealant with PTFE provides an excellent replacement for pipe dopes and pipe tapes.

Easy to use and apply
Directional freedom
Does not contain solvents
Excellent chemical and temperature resistance
Cures at room temperature
Will not shred, tear, or cause blockages

USD 72.55

Comprar 2 por USD 70.37 cada uno
Comprar 6 por USD 68.20 cada uno

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Permabond LH051 Technical Data Sheet

Detalles

Physical Properties of Uncured Adhesive

Chemical composition: Methacrylate esters
Appearance: White
Viscosity @ 25°C:
- 2rpm: 450,000 mPa.s (cP)
- 20rpm: 70,000 mPa.s (cP)
Specific Gravity: 1.1
Particle Size: <10µm

Typical Curing Properties

Maximum gap fill: 0.5mm (0.02")
Time taken to reach handling strength (M10 steel) @23°C: 2 hours*
Full strength (M10 steel) @23°C: 24 hours

*Copper and its alloys will make the adhesive cure more quickly, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10. Alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

Torque strength (M10 steel ISO10964)
- Break: 4 N·m (35 in.lb)
- Prevail: 3 N·m (25 in.lb)
Compressive shear strength (steel collar & pin ISO10123): 7 MPa (1,000 psi)
Coefficient of thermal expansion: 90 x 10^-6mm/mm/°K
Coefficient of thermal conductivity: 0.19 W/(m.K)

Más información