LOCTITE

411 Toughened Gap Filling Instant Adhesive

In Stock

LOCTITE® 411 is a clear/colorless, high viscosity instant adhesive. This general purpose, gap-filling adhesive is suitable for bonding elastomers, plastics, and metals. LOCTITE® 411 is a toughened adhesive that exhibits excellent peel strength and added-heat resistance. Fixture time occurs in seconds, with full cure achieved in 24 hours at normal room humidity.

Toughened, clear
High viscosity
Excellent peel strength
Fixture time in seconds
Heat resistant up to 210°F
Bonds rubbers, plastics, and metals

Tan bajo como USD 8.75

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

SDS/MSDS Sheets

LOCTITE® 411 Safety Data Sheet

Product Info & TDS Sheets

LOCTITE® 411 Technical Data Sheet

Detalles

Más información
Código PAC	C100425
Marca	LOCTITE
Tipo	Cianoacrilato

Más información

Technical Specifications

Typical Use: Suitable for applications where heat resistance is required. LOCTITE® 411 exhibits improved impact and peel resistance.
Chemical Composition: Ethyl cyanoacrylate
Color: Clear
Components: 1-Part
Cure System: Humidity
Cure Time: Up to 24 hours depending on the substrate used, the bondline gap, and the relative humidity.
Dielectric Strength: 25 kV/mm
Flash Point: 80 to 93.3°C
Specific Gravity: 1.05 @ 25°C
Thermal Conductivity: 0.1 W/mK
Viscosity: 4,000 to 8,000
Volume Resistivity: 10 x 10¹⁵ ohm-cm