5-Position Programmable Stirring Hot Plate with Ceramic Top, 12" x 12"
Heat, Stir, and Time Complex Routines on 5 Samples at Once. Heat all samples at the same temperature. Stir all samples at the same speed or each at a different speed. The unit comes with a 4? stainless steel immersion probe.
EchoTherm™ HS65 Fully Programmable Digital Multi-Stirring Hot Plates are the most advanced and easy-to-use units available. In manual operation, simply select the parameter to be set and enter the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time. The HS65 has temperature ramping which can be set to change the temperature from one set point to another at precisely selected rates.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds, and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
Features
- 5-stirring positions. All the same speed or each at a separate speed
- 10-program memory stored in CMOS. No batteries required
- Each program can be 10 steps, where each step includes a temperature, stirring speed, time, and heating rate
- Repeat any program 1–98 times automatically. Infinite repeats settable
- Programmable and non-programmable operation
- Platinum RTD temperature measurement for ±1% accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
- Temperature ramping for exact heating and cooling rates
- PID temperature control to 1°C on plate surface or solution with the accessory probe
- Stir aqueous solutions from 100–1500 rpm. All at the same speed or each differently
- Stirrer capacity aqueous solutions: 5 x 800 ml beakers max
- Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
- Electronic calibration stored in CMOS
- RS232 interface for control or recording data on a computer
- Custom display of all parameters all the time
- 12-month warranty
- UL, CSA, and CE compliant
Applications
- Preparation of heat-sensitive culture media/melting agarose
- Digestion of plant tissue samples for assay of organic elements
- Modeling production run industrial processes
- Corrosion testing
- Leaching studies
- Electrochemistry
- Catalysis research
- Blending petrochemical products
- Removal of oxides from metallic powders
- Precise control of polymerization reactions
- Gas solubility in organic solvents
- Dissolutions
Specifications
Programming
- Memory capacity: 10 programs
- Individual Program Capacity: 10 steps per program where a step is a temperature, stirring speed, time, and ramping rate if wanted
- Repeat a Program Automatically: 1 to 98 times or infinitely
Temperature Measurement
- Platinum RTD: 100 ohm at zero in a plate and in probe
- Temperature Range: 0–400°C on the ceramic plate
- Readability: 1°C
- Temperature control type: PID
- Temperature accuracy: 1% ±
- Temp stability: 1°C
- Heater power: 1400 watt
Stirrer
- Capacity: 5-800 ml beakers water
- Speed range unloaded: 100-1500 rpm
- Readability: 10 rpm
- Settability: Nearest 10 rpm
Electrical
- VAC: 115 VAC, 50/60 Hz (230 VAC available upon request)
- Fused: yes
- Line Cord: Detachable, 6 foot (1.8 meter), three-wire grounded
Dimensions
- Width: 12.5” (31.75 cm)
- Depth: 18.0”(45.7 cm) without a line cord plugged in
- Height: 4.5” (11.43 cm)
| SKU | I174033 |
|---|---|
| Modelo del fabricante | HS65 |
| Marca | Torrey Pines Scientific |
| Superficie | Ceramica |
| Ajuste | Programable |
| Entrada | 115V |
| Tipo | Agitador de placa caliente |
