Shin-Etsu X-832-299-A/B-36KG-KIT

Platinum Fast Cure Dual Component Potting Gel Encapsulant, (2) 18kg Pails

Shin-Etsu's X-832-299 is a two-part dimethyl-polysiloxane-based potting gel that will cure to form a soft pliable elastomer to protect sensitive electronic components. This material has adhesion to most substrates including aluminum, stainless steel, chromium, copper, nickel, brass, iron glass, and ceramics. Tinted colors make this material easy to perform visual inspection to ensure proper mixing.

  • Superior vibration resistance
  • Excellent electrical insulation
  • Dual component, 1:1 mix ratio
  • Room-temperature cure
  • 2-part platinum fast curing potting gel
  • Penetration is a soft 80-penetration
  • Tinted colors allow for easy visual inspection
  • Excellent protection from environmental conditions
Precio especial USD 998.57 Precio habitual USD 1,109.52

Documentos técnicos

Notes

  • If you like the SES22533-60-A/B but want a product that is more tacky, this product is perfect for you
  • This product will cling to your fingers as you pull on it
  • One side is colored red, and the other side is colored blue. When mixed it creates a purple color. This helps to ensure a proper mix ratio.

Typical Properties

  • Type: Potting Gel
  • Cure Type: Addition
  • One/Two Component: Two
  • Color: A-Blue, B-Red
  • Viscosity A (cps): 700
  • Viscosity B (cps): 700
  • Mix Ratio by weight: 100:100
  • Cure Conditions: 24hr @23°C
  • Snap Time (min): 8
  • Penetration (1/10mm): 80
  • Volume Resistivity (Ω·cm): 2x1015
  • Dielectric Strength (kV/mm): 20
  • Dielectric Constant: 2.7 @ 50Hz
  • Dielectric Dissipation Factor: 60
  • Thermal Conductivity (W/m·K): 0.16
  • Usable Temperature Range (C): -40 to +200

Note: Values are not for specification purposes.

Más información
Unidad de venta Cubo
SKU I509763
Modelo del fabricante X-832-299-A/B-36KG-KIT
Marca Shin-Etsu
Talla/Tamaño 36kg
¡Hemos encontrado otros productos que le pueden gustar!
©Production Automation Corporation. All Rights Reserved.