SCS 770720

Portable Charged Plate Monitor

Disponible

Handheld Meter for Measuring Offset Voltage and Discharge Times of Air Ionizers
Used for the periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53.
Timer for Decay Rates from ±1000V to ±100V
Measures ionizers’ ability to neutralize both positive and negative electrostatic charges within the coverage area.
180 Degree Rotary Head with 2.75” x 1.25” Plate
Allows operator to read display at various angles
Zero Point Adjustment Button
Ensures measurement accuracy and repeatability
Powered by 2 AA Batteries
Includes Ground Cord and Soft Carrying Case
NIST Calibrated
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration.

Precio especial USD 1,596.00 Precio habitual USD 1,680.00

Documentos técnicos

Product Videos

Specification Sheets

Warranty

Signal detection method: Oscillating chopper method
Display refresh frequency: 0.2 seconds
Measurable potential range: 0 to ±1999 V (resolution: 1 V)
Measurement time range: 0.0 to 99.9 s
Continuous operating limit: Approximately 6 hours (with alkaline battery, I.B mode)
Sensor head rotation angle: 180° (stops every 45°)
Display: LCD display
Mode switching: Switch modes by pressing SELECT button
Battery check: Remaining charge displayed in display panel
Battery: Two AA batteries, Power adapter (sold separately)
Operating temperature/ humidity range: 10 to 40° C, 60% RH or less, non-condensing
Measurement accuracy: ±10% rdg ±2 digit
Dimensions: 2.8" x 1.2" x 6.9" / (70mm x 30mm x 174mm)
Plate dimensions: 2.8" x 1.3" / (70mm x 32mm)
Static electricity capacity: 20 pF ± 2 pF
Weight (including battery): 8 oz (240 g)
Country of Origin: Japan