Combo Wrist Strap/Footwear Tester, Includes NIST Certificate
- Tests Operator's Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms1
Determines that operator’s personnel grounding devices (wrist straps2, foot grounders, ESD shoes, smocks3) are functioning correctly. - Compatible with Single-Wire and Dual-Wire Wrist Straps
See SCS Single-Wire Wrist Straps and Dual-Wire Wrist Straps - Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds
Reduces time spent testing personal grounding devices used in ESD Control Plans - Solid-State Test Switch with No Moving Parts
Maintains accuracy of tests and extends the lifetime of the tester - Split Foot Plate for Testing Foot Grounders (or ESD Shoes)
Tests both foot grounders independently at the same time - 30 Volt Test Signal
Provides accurate tests that are not humidity dependent - Relay for Use with Automatic Doors or Other Locking Systems
Controls access to ESD Protected Areas - Optional Stand
Use the SCS 770759 stand as an alternate installation method for the Dual Combination Tester - Calibration Verification
Use the SCS 770751 Limit Comparator to check the test limits of the Dual Combination Tester without removing it from the workplace - NIST Calibrated with Certificated Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. - 100-240VAC Power Adapter with Interchangeable Plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia, and Europe - Made in the United States of America
- Default test limits listed. Additional test settings are noted in the user guide.
- The Dual Combination Tester can verify both single-wire and dual-wire wrist straps.
- The Dual Combination Tester will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.
| SKU | I381379 |
|---|---|
| Modelo del fabricante | 770758 |
| Marca | SCS |
| ESD certificado | Sí |
| Tipo | Probador combinado |
| Incluye | Certificado NIST |
-
Materiales de empaque ESD
Bolsas antiestáticas y antihumedad, paquetes desecantes y mucho más. -
Tapetes para conexión a tierra
Tapetes de puesta a tierra de banco disponibles en caucho y vinilo. -
Equipo de ionización
Examine los modelos de sobremesa, de techo, de barra ionizadora y más. -
Gabinetes de filamento seco
Gabinetes de almacenamiento eficientes y secos para sus componentes. -
Carros para electrónica y PCB
Examine los carros de bobinas, los carros de bandejas para kits, los carros de plantillas y mucho más. -
ESD Meters & Monitors
Mida las tensiones estáticas que surgen de la acumulación electrostática.
Regístrese a nuestro boletín electrónico para ser el primero en conocer los nuevos productos, promociones y noticias de la industria.
Regístrese