Supreme Textured Dual-Layer Static Dissipative Rubber Workstation Mats

With a dissipative upper layer and a conductive base, this material is as comfortable as ESD vinyl and rubber materials, but unlike typical CR and NBR, lasts longer when exposed to chemical cleaning with solvents like isopropyl alcohol.

Tests show that even in high heat applications where the hardness and elongation properties in rubber are severely damaged after one or two uses, the Supreme Mat lasts through more cycles without degrading or losing electrical properties. When left in an oven for 24 hours at 150°C/302°F, Supreme Mat remained dissipative according to ANSI/ESD STM 4.1.

Some anti-static additives degrade over time when exposed to sunlight or fluorescent lighting. The electrical properties in Supreme Mat remain unaffected and colors do not fade.

Ideal for the following applications:

• Environments tailored to ANSI/ESD S20.20 specifications.
• Cleaning with IPA and other mild solvents.
• High heat curing of PCB conformal coating.

Features

• Pre-cut mats include two 10mm female snaps.
• Two layer; 0.080" (2 mm) thickness.
• Colored layer: 10⁶ - 10⁸ ohms @12%RH, ohm per cm RTG, RTT, Vol R.
• Black layer: Bottom side resistance measures less than 5 x 10⁵ ohms.
• Endures more high temperature applications than other ESD mats.
• Embossed finish reduces light glare and parts slippage withstands harsh chemicals.
• No outgassing or VOC; ideal for controlled environments.
• Propriety formula is inherently UV and fade resistant.
• Made in the USA.
• Available in blue and gray.