SpecMat-H Textured Single-Layer Static Dissipative Vinyl Workstation Mats

The proprietary polymers used to manufacture this material are homogeneously dispersed with a migratory anti-static formula that allows for both surface and volume resistance. By design, anti-static properties cannot be worn away through wear or outgassing.

Resistant to solder, heat, and most common solvents, SpecMat-H is an economical choice for static- sensitive production areas in electronics manufacturing and laboratories. Tray mats can be custom-cut with a sharp blade. Scraps can be recycled.

Blended with hydrophilic molecules to control the speed of dissipation, the ESD-Homogeneous material will deliver a typical resistance-to-ground measurement of 7 x 10⁸ - 9 x 10⁹ ohms per ANSI/ESD STM4.1.

The components used to manufacture this product are RoHS3 compliant and are not listed on the REACH SvHC list.

Ideal for the following applications:

• Pre-cut mats include two 10mm female snaps.
• Liners for conductive trays.
• Metal shelving in EPAs.

Features

• Single layer in two thicknesses: 0.09" (2.38 mm) & 0.06" (1.53mm).
• 7 x 10⁸ - 9 x 10⁹ ohms RTG, RTT, Vol R.
• Can be custom-cut with sharp blade; scraps are recyclable.
• Embossed finish reduces light glare and parts slippage.
• Durable surface withstands solder, flux, and harsh chemicals.
• Low outgassing and VOC are ideal for controlled environments.
• UV additives to protect color and eliminate fading.