Torrey Pines Scientific IC35XT

Programmable Large Chilling/Heating Plate with Expanded Chilling

The completely solid-state EchoTherm™ IC35 Large, Heavy-Duty, Digital, Programmable, Electronic Chilling/Heating Dry Bath is versatile, reliable, and easy to use. The IC35 has simple digital controls and a two-line alphanumeric display that is backlit for easy reading. The display shows both the target and actual temperatures. Additionally, it is used to display the timer and all programming functions.

The chilling/heating surface is a 5" (12.7 cm) square aluminum plate that is very flat for optimal contact with the sample. When unloaded, the plate will go below 0°C in under two minutes. It will heat to 37°C even faster. Generally, the unloaded surface will decrease the temperature by about 3°C/minute. Heating rates on the unloaded plate are usually about 5°C/minute. The blocks sold as accessories range in size and mass depending upon the samples used. The unit can drive the biggest block from ambient temperature to 4°C in less than 30 minutes. When used with an accessory cover these blocks can be driven below 0°C. Temperature gradients from the center to the edge of any accessory block will be less than 0.5°C at any temperature.

Precio especial USD 2,441.25 Precio habitual USD 2,625.00

Features

  • 5-program memory
  • Energy-efficient Peltier design
  • Digital control to 1°C from -20°C to 100°C without sample block
  • Control at ambient
  • Built-in data logger
  • Count down timer (up to 30 days) with audible alarm and user settable Auto-Off
  • RS232 I/O port for data collection
  • Electronic calibration. Factory set, but user can set to any local standard
  • Small, compact size. Uses very little bench space
  • 12-volt DC operation. External power supply provided
  • 12-month warranty
  • UL, CSA and CE compliant

Applications

  • Unattended restriction digestions or ligations at elevated temperatures then reducing temperature to 4°C automatically to reduce non-specific nuclease digestion of target DNA
  • Automatically stopping reactions by having the unit reduce sample temperature after a specific reaction time
  • Producing denatured probes or single stranded DNA molecules by heating to 90°C/95°C for a given time and rapidly reducing temperature to 4°C to prevent renaturation
  • Automatic temperature profiles to grow bacteria at 37°C, then increasing temperature to induce events, and then lowering temperature to 4°C to prevent degradation
  • Maintaining 14°C for ligation reactions
  • Enzyme reactions and deactivations
  • Maintaining 17°C for storing oocytes
  • Storing reagents at 4C in 15, 50, 250, and 500ml centrifuge tubes
  • Storing samples at ice bucket temperatures without the mess
  • Incubating samples at 37°C in 96-well assay plates or in aluminum blocks holding 0.2, 0.5 and 1.5 ml centrifuge tubes, vials, and test tubes
  • Storing enzyme or DNA libraries at your workstation
  • Freezing and storing most any sample at your workstation

Specifications

Temperature

  • Range: -10°C to 100°C
  • Readability: 1°C
  • Accuracy: ±1°C
  • Stability: ±1°C
  • Sensor Type: Platinum RTD
  • Controller Type: PID
  • Uniformity: ±0.5°C

Timer

  • Range: 00:01 to 30 days
  • Readability: 1 second
  • Audible Alarm: Yes, alarm sounds for 1 minute. Timer counts up until UP or DOWN key is touched

Programming

  • Programs Stored: 5
  • Individual Program Capacity: 10 Steps
  • Program Repeat: 1–99 times
  • Memory Backup: Yes, in CMOS

Data Logger

  • Sample times: 1 sec, 1 min or 5 minutes per data point
  • Capability: 7825 data points

Electrical

  • Heater/Chiller: Peltier, 100 watts
  • Operating Voltages: From 90 to 265 volts AC into universal power supply. 12 VDC output to chiller/heater module
  • Power Consumption: 100 watts
  • Power Switch: Yes

Chilling/Heating Module Dimensions

  • Width: 8.5" (21.6 cm)
  • Depth: 10" (25.4 cm)
  • Height: 4" (10.2 cm)

Power Supply Dimensions

  • Length: 6.5” (16.5 cm)
  • Height: 3.2” (8.1 cm)
  • Width: 2.2” (5.6 cm)
  • Weight (power supply & chiller/heater module): 8 lbs (3.6 kg)
Más información
SKU I174051
Modelo del fabricante IC35XT
Marca Torrey Pines Scientific
Ajuste Programable
Rango 20° to 100°C
Entrada 100 to 265V
¡Hemos encontrado otros productos que le pueden gustar!
©Production Automation Corporation. All Rights Reserved.