Programmable Chilling/Heating Plate with Power Supply
Chill, heat, or freeze two separate sets of samples at two separate temperatures with individual control from -20°C to 100°C without a sample block. These completely solid-state 2-Position Chilling/Heating Dry Baths are versatile, reliable, and easy to use. Each heating/chilling station has its own Peltier module, and the entire unit has only two moving parts: the fans. Each plate can be set separately for any temperature within the range of the unit without interaction between the plates. It has simple digital controls and a two-line alphanumeric digital display that is backlit for easy viewing. The display shows the target and actual temperatures of both plates.
The chilling/heating surfaces are each 2.875” (7.3 cm) x 4.375” (11.1 cm) aluminum plates that are very flat for optimal contact with the sample blocks. When unloaded, the plates will reach below 0°C in under two minutes. They will heat to 37°C in under a minute. The chilling and heating rates will change with loads. For instance, temperatures to 4.0°C can be reached on sample blocks as large as 4” (10.2 cm) x 3” (7.6 cm) x 6” (15.2 cm) in about 30 minutes.
Units come complete with a bench-top power supply, instruction manual, and AC line cord. Sample blocks and covers are available as accessories and are shown on the price list.
Features
- 5-program memory
- Energy-efficient Peltier design
- Digital control to 1°C from -20°C to 110°C without sample block
- Control at ambient
- Built-in data logger
- Count down timer (up to 30 days) with audible alarm and user settable Auto-Off
- RS232 I/O port for data collection
- Electronic calibration. Factory set, but user can set to any local standard
- Small, compact size. Uses very little bench space
- 12-volt DC operation. External power supply provided
- 12-month warranty
- UL, CSA and CE compliant
Applications
- Unattended restriction digestions or ligations at elevated temperatures then reducing temperature to 4°C automatically to reduce non-specific nuclease digestion of target DNA
- Automatically stopping reactions by having the unit reduce sample temperature after a specific reaction time
- Producing denatured probes or single stranded DNA molecules by heating to 90°C/95°C for a given time and rapidly reducing temperature to 4°C to prevent renaturation
- Automatic temperature profiles to grow bacteria at 37°C, then increasing temperature to induce events, and then lowering temperature to 4°C to prevent degradation
- Maintaining 14°C for ligation reactions
- Enzyme reactions and deactivations
- Maintaining 17°C for storing oocytes
- Storing reagents at 4C in 15, 50, 250, and 500ml centrifuge tubes
- Storing samples at ice bucket temperatures without the mess
- Incubating samples at 37°C in 96-well assay plates or in aluminum blocks holding 0.2, 0.5 and 1.5 ml centrifuge tubes, vials, and test tubes
- Storing enzyme or DNA libraries at your workstation
- Freezing and storing most any sample at your workstation
Full Product Specifications
Temperature
- Range: -10°C to 100°C
- Readability: 1°C
- Accuracy: ±1°C
- Stability: ±1°C
- Sensor Type: Platinum RTD
- Controller Type: PID
- Uniformity: ±0.3°C
Timer
- Range: 00:01 to 30 days
- Readability: 1 second
- Audible Alarm: Yes, alarm sounds for 1 minute. Timer counts up until UP or DOWN key is touched
Programming
- Programs Stored: 5
- Individual Program Capacity: 10 Steps
- Program Repeat: 1–99 times
- Memory Backup: Yes, in CMOS
Data Logger
- Sample times: 1 sec, 1 min or 5 minutes per data point
- Capability: 7825 data points
Electrical
- Heater/Chiller: Peltier, 50 watts
- Operating Voltages: From 90 to 265 volts AC into universal power supply. 12 VDC output to chiller/heater module
- Power Consumption: 50 watts
- Power Switch: Yes
Chilling/Heating Module Dimensions
- Width: 6.5” (16.5 cm)
- Depth: 8.75” (22.2cm)
- Height: 3.5” (8.9 cm)
Power Supply Dimensions
- Length: 6.5” (16.5 cm)
- Height: 3.2” (8.1 cm)
- Width: 2.2” (5.6 cm)
- Weight (power supply & chiller/heater module): 8 lbs (3.6 kg)
| SKU | I174045 |
|---|---|
| Modelo del fabricante | IC25 |
| Marca | Torrey Pines Scientific |
| Ajuste | Programable |
| Rango | 10° to 100°C |
| Entrada | 90 to 265V |
Regístrese a nuestro boletín electrónico para ser el primero en conocer los nuevos productos, promociones y noticias de la industria.
Regístrese