LH150 Passive Metal Grade Anaerobic Thread Sealant, White

Physical Properties of Uncured Adhesive

• Chemical composition: Methacrylate esters
• Appearance: White
• Viscosity @ 25°C: 260,000 mPa.s (cP)
• Specific Gravity: 1.1
• Particle Size: <10µm

Typical Curing Properties

• Maximum gap fill: 0.5mm (0.02")
• Time taken to reach handling strength (M10 steel) @23°C: 2 hours*
• Full strength (M10 steel) @23°C: 24 hours
• Instant air pressure seal:
  • 1,000 psi (hand assembled)
  • 3,000 psi (10 in-lb on torque)

*Copper and its alloys will make the adhesive cure more quickly, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10. Alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

• Torque strength (M10 steel ISO10964)
  • Break: 6 N·m (50 in.lb)
  • Prevail: 3 N·m (25 in.lb)
• Compressive shear strength (steel collar & pin ISO10123): 7 MPa (1,000 psi)
• Coefficient of thermal expansion: 90 x 10^-6mm/mm/°K
• Coefficient of thermal conductivity: 0.19 W/(m.K)