Temp-Tec Neoprene Thermal Protection Gloves with Pebbled Rough Grips & Double-Knit Cotton Liner, Black/Blue

Recommended Areas of Use

• Boiler room work
• Handling of hot piping
• Handling of moulds in the ceramic industry
• Manufacture of adhesives
• Manufacture of insulating electric wires
• Road works in cold conditions
• Steam cleaning
• Filleting Fish
• Polymer extrusion
• Chemical treatment of metals
• Oil quenching of steel
• Sampling of hot petrochemical products

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests. For very high or low temperatures, be careful that a sustained contact does not cause burns.
• It is not recommended for persons sensitized to dithiocarbamates to use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the MAPA PROFESSIONAL for breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Ensure the inside of the gloves is dry before putting them on again.

Storage Conditions

• Store the gloves in their original packaging at a temperature not below 5°C.

Laundering Conditions

• Before taking off the gloves, clean them as appropriate:
• in use with paints, pigments and inks: wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (diluents, etc...): rub over with a dry cloth
• in use with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth
• Caution: improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.