StanSolv Flock Lined 15 Mil Nitrile Chemical Resistant Gloves, Green

Recommended Areas of Use

• Cleaning chemical tanks
• Handling and transporting chemicals (solvents)
• Assembly of small, oil and grease free parts
• Chemical treatment of metals
• Maintenance in wet environments (water, oil, greases, hydrocarbons)

Instructions for Use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• Persons sensitized to dithiocarbamates and thiazoles should not use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage Conditions

• Store the gloves in their original packaging protected from light, humidity and heat.

Laundering Conditions

• in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (alcohols, diluents, etc.) : rub over with a dry cloth
• in use with acids or alkalies : thoroughly rinse the gloves in use with under running water, and rub over with a dry cloth
• Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying Conditions

Food Contact US

• FDA 21CFR 177.2600