HY 4090 Structural Hybrid Adhesive

Technical Specifications

• Application Method: Dispense gun
• Applications:
  • Bonding dissimilar materials
  • Bonding plastic
  • Bonding rubber,
  • Construction
  • Direct bonding
  • Edge bonding
  • Exterior repairs
  • Interior repairs
  • Structural bonding
• Cure Type: Room temperature (ambient) cure, Two component mix
• FEA (finite element analysis): Finite strain, Viscoelastic
• Fixture Time: < 180 seconds
• Gap Fill: 2mm
• Hardener: Color: Off white
• Hardener: Viscosity, cone & plate, @ 25°C: 25,000 mPa·s (cP) - 40,000 mPa·s (cP)
• Mix ratio, by weight: 1:1
• Mixed: Color: Off white
• Mixed: Key characteristics:
  • Cure Speed: fast cure
  • Gap filling
  • Humidity resistant
  • Impact resistant
  • Moisture resistant
  • UV resistant
  • Vibration resistant
  • Viscosity: high viscosity
• Mixed: Operating temperature: -40°C-300°C (-40°F-284°F)
• Number of Components: 2-Part
• Physical Form: Liquid
• Recommended for use with:
  • Composite: advanced composites
  • Dry surface
  • Elastomer: highly filled elastomer
  • Epoxy
  • Fiberboard
  • Gel coat
  • Laminate
  • Metal
  • Non-gel coat
  • Painted surface
  • Phenolic
  • Plastic
  • Rubber
  • Thermoplastic
  • Thermoset
  • Urethane: cast urethane
  • Vinyl
  • Wood
• Resin: Color: Clear
• Resin: Viscosity, cone & plate, @ 25°C: 4,000 mPa·s (cP) - 7,000 mPa·s (cP)
• Shear Strength, Steel (grit blasted): 17.0 N/mm² (2,420.0 psi)