Premium ESD-Safe Digital Precision Hot Air Rework Station

• To protect a particular area or an adjacent components, we recommend the use of Protectors and Extractors and, to direct the heat to a particular area and protect adjacent components you can use Nozzles for TET.
• Its adjustable tool holder adapts to your work position and Easy Nozzle Changer allows you to switch between nozzles without interrupting your work.
• The auto-stop function is a safety measure which guarantees that the heat is automatically cut off when the tool is in the stand. This prevents potential overheating and you save power and lengthen the durability of the heater.
• The operator can choose between 3 modes of activation to start blowing hot air: Auto-start (just lifting the tool), pressing the button on the tool or using P405 Pedal instead of the stand.

Specifications

• Selectable Temperature: 150 to 450ºC (300-840ºF)
• Air Flow: 2 to 17 SLPM
• Temperature Profiles: Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored.
• Operating Modes: Heating / Profiles / Cooling
• Vacuum: 30% / 228 mmHg / 9 inHg

Connectivity

• Type K thermocouple: Can be used both for Control and Protection purposes.
• USB-B (rear): Software PC
• USB-A (front): Firmware update, Graphics / Profiles management
• Robot: RS-232 remote control
• Pedal: Optional tool control
• Equipotential bonding: Optional connection to EPA
• ESD/EOS / ESD-safe

Power Supply

• Nominal Power: 300 W
• Operating Temp. Range: 10 to 50ºC / 50 to 120ºF

Dimensions and Weight

• Premium Station Weight: 4.72 kg. / 10.41 lb.
• Premium Station Dimensions: 232 x 148 x 160 mm / 9.1 x 5.8 x 6.3 in
• Package Weight: 5.68 kg./ 12.52 lb.
• Package Dimensions: 490 x 485 x 278 mm / 19.2 x 19.1 x 10.9 in