ESD-Safe Nano Digital Preheater
Avoid thermal shock on multilayer PCBs while reworking.
This is a complete solution to rework small PCBAs, such as ones commonly used in smartphones. It features a heating area of 108 x 70mm / 4" x 3".
Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged.
Product Includes
- Heater unit
- Console
- PH218 Thermocouple Type K
- PH217 Kapton Tape
- Instruction manual
Features Three Work Modes
- Power Mode allows working at a fixed power level with the option of using protection thermocouple.
- Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.
- Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 25 profiles of temperature.
Specifications
- Peak power: 300W
- Temperature range: 120-482°F (50-250°C)
- Heating Area: 4.25" x 2.75"
- Type K TC Connector: 2 for control & protection
- Profiles: 22 (up to 16 steps for each)
- Set temperature profiles: 3 profiles (2, 3 or 4 steps)
- Maximum work time: 50 min or indefinite
- USB-A:
- Firmware update
- Graphics and profiles
- USB-B: PC communications
- Robot connector: Remote control
- Aux. Connector: Console connection
- Pedal connector: Connect a pedal (ref. P-005) to control the heater
- Preheater unit dimensions: 7.05" x 6.5" x 1.65"
- Preheater unit weight: 2.65 lbs.
SKU | I510950 |
---|---|
Modelo del fabricante | PHNE-1A |
Marca | JBC |
ESD certificado | Sí |
Tipo | Infrarrojo |