Gordon Brush 900183L

Conductive Duster with Thunderon® and Goat Hair Bristles & Polypropylene Shoe Handle, 16.75" OAL

11" Thunderon® and Goat Hair Bristle Shoe Handle Brush
This conductive brush has Thunderon® and goat hair mixed fill material set within a conductive polypropylene plastic handle.
Ideal for cleaning and dusting areas that are sensitive to static electricity where the promotion of corona discharge is required.
This high-quality brush has a 1 x 54 row pattern, with a 1-1/4" trim, and a brush face of 11" x 3/8".
The handle is 16-3/4" long x 3/8" wide x 7/8" high.
Thunderon® is a very fine (0.0015" diameter) conductive acrylic fiber that is chemically bonded with copper sulfide.
This high-performance fiber will dissipate a charge on any electrically charged surface.
The fineness of the fiber lends itself to be used in applications that require non-contact corona discharge on static-charged surfaces.
The surface resistivity of Thunderon® is 10²Ω/cm.
The goat hair mix adds stiffness to the brush.
The plastic handle is conductive with a surface resistivity of 10⁴Ω/cm.

USD 62.55

Comprar 20 por USD 61.30 cada uno
Comprar 50 por USD 59.42 cada uno
Comprar 100 por USD 56.30 cada uno

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Detalles

Conductive brushes have a surface resistivity range of 10²Ω/cm - 10⁴Ω/cm and are used to remove static buildup from the work surface.
Conductive brushes will act as a conduit between the charged surface and the path to ground.
They are made with fully conductive materials that are active static eliminators.
Use conductive brushes with a wrist strap or other mechanism to provide a path to ground.
(Note: Conductive fibers are not recommended for use with unencapsulated electronic microcircuits; minute pieces of conductive material have been known to cause short circuits.)