Desco 19651

Multi-Mount Continuous Monitor

Disponible

Single Workstation Continuous Monitor: Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
IMPROVED Operator Alarm: Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and the monitor’s jack is intermittent
Mat Monitor Switch: Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
Audible Alarm Adjustment: Sets the audible alarm volume from loud to louder
19653 Remote Alarm Accessory: Connect to the Multi-Mount Monitor and place in the operator’s field of view to alert the operator of alarms
Desco Wave Distortion Technology: Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
Park Snap: Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
Single-Wire Impedance Design: Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage: Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time: Identifies failures and intermittencies that inferior technologies miss
Continuous Visual and Audible Alarms: Illuminates green to indicate proper grounding; illuminates red and sounds an audible alarm when intermittent or failed connection occurs
Calibration Verification: Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
100-240VAC Safety Certified Power Adapter with North American Plug: Works with standard electrical systems in North America, Japan, and Asia
Made in the United States of America

USD 176.79

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Product Info & TDS Sheets

Desco Multi-Mount Monitor Installation, Operation and Maintenance

Product Videos

Desco Wave Distortion Technology Demonstration

Detalles

*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 10⁶ ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.

Más información