Viper Ionizing Air Gun with Power Adapter & 6' Hose, 100-240V
The Desco Viper Ion Gun is a point-of-use ionizer used for neutralizing electrostatic charges to eliminate attraction, visual imperfections and contamination issues by dislodging charged dust and debris. It uses compressed clean dry air (CDA), or a special nozzle (19596) may be purchased separately for use with nitrogen. Fast discharge times with ±15 volt offset voltage meet the required limits of ANSI/ESD S20.20 and ESD TR53. A high frequency piezo AC power supply is located Inside of hand piece to maintain consistent ionization performance with longer hose lengths (standard 6' hose included) and eliminate the need for a remote console. The light weight of the Viper Ion Gun (less than 1/2 pound; 200 grams) allows for comfortable extended use by operators. The Viper Ion Gun is designed with slotted tips to meet the OSHA requirement for pressure relief. A green LED on the back of the hand piece illuminates when the trigger is depressed to indicate that the gun is outputting ionized air. A red LED indicates abnormal output. Normal power consumption is approximately 2.5 Watts.
Packaging Includes
- Viper Ion Gun
- Power Adapter, 24VDC, with interchangeable plugs (North America, UK/Asia, Europe)
- Air Tube, 6.0' Length
- Certificate of Calibration
- Point-of-Use Compressed Air (7-87 psi) Ionizing Blow Off Gun neutralizes electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris.
- Fast Discharge Times with ±15 Volt Offset Voltage Balance.
- Meets required limits of ANSI/ESD S20.20 and ESD TR53.
- High Frequency Piezo AC with Transformer Inside of Hand Piece
- Consistent ionization performance with longer hose lengths (6-foot hose included) with no additional remote console or separate high voltage power supply required.
- Balanced: Lightweight Ergonomic Design (Less Than 0.5 Pounds)
- Aligns the center gravity with the operator's gripping hand for ease of use by operators.
- Long Handle-Trigger to reduces stress on operator's fingers.
- Slotted Nozzle Tips
- Meets OSHA requirement for pressure relief.
- Clean Dry Air (CDA) or Nitrogen
- Use with standard shop air or purchase the 19596 tip for use with Nitrogen.
- 10 Foot (3 Meter) Power Cable (100~240V) to 24VDC Power Adapter
- Use with multiple power sources by changing blades on the power adaptor.
- Status LEDs illuminate when the trigger is held down and to indicate that the gun is outputting ionized air.
- NIST Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- 100-240V Power Adapter with Interchangeable Plugs
- Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
Specifications
- Power Supply Input Voltage: 100-240V, 50/60 Hz
- Power Supply Output Voltage: 24 VDC
- Operating Temperature: 32° F to 104 ° F (0 to 40° C)
- Dimensions: 6.5" x 5.4" x 1.0" (165 mm x 136 mm x 25 mm)
- Weight: 0.4 lbs (0.2 kg)
- Balance: ±15 V
- Ozone: <0.04 ppm
- Supply Pressure: 7.0 psi to 87 psi
- Minimum Airflow: 13 CFM
- Gas Input: Clean Dry Air (CDA) or Nitrogen
- Gas Connection 6.0 mm port
- Enclosure Gun - PBT polymer Nozzle - PPS polymer
| SKU | I202409 |
|---|---|
| Modelo del fabricante | 19595 |
| Marca | Desco |
| Entrada | 100 to 240V |
| Incluye | Manguera de 6' |