Mini Monitor
- Single Workstation Continuous Monitor: Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
- Illuminated Enclosure: Makes the status of the operator and worksurface highly visible to the operator and supervisor
- IMPROVED Continuous Visual and Audible Alarms: Illuminates green to indicate proper grounding; illuminates red and sounds an audible alarm when intermittent or failed connection occurs; illuminates blue to indicate standby mode
- Park Delay Timer and ParkSnap™: Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
Includes:
- (1) Mini Monitor
- (2) Countersunk Washer
- (2) Flat Head Screw, 6-32 x 3/8"
- (1) Power Adapter with North American Plug, 9 VDC
Features
- Mat Monitor Switch: Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
- Audible Alarm Adjustment: Sets the audible alarm volume from loud to louder
- Wave Distortion Technology: Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap's path-to-ground* and the presence of its 1 megohm safety resistor
- Threaded Worksurface Grounding and Mounting: Grounds and monitors the worksurface with no additional wire
- Single-Wire Impedance Design: Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
- 1.2 Volt Operator Test Voltage: Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
- <50 Millisecond Alarm Response Time: Identifies failures and intermittencies that inferior technologies miss
- NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- 100-240VAC Safety Certified Power Adapter with North American Plug: Works with standard electrical systems in North America, Japan, and Asia
- Made in the United States of America
*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.
| SKU | I513266 |
|---|---|
| Modelo del fabricante | 19341 |
| Marca | Desco |
| ESD certificado | Sí |
| Tipo | Conductor sencillo |
| Incluye | Certificado NIST |
-
Materiales de empaque ESD
Bolsas antiestáticas y antihumedad, paquetes desecantes y mucho más. -
Tapetes para conexión a tierra
Tapetes de puesta a tierra de banco disponibles en caucho y vinilo. -
Equipo de ionización
Examine los modelos de sobremesa, de techo, de barra ionizadora y más. -
Gabinetes de filamento seco
Gabinetes de almacenamiento eficientes y secos para sus componentes. -
Carros para electrónica y PCB
Examine los carros de bobinas, los carros de bandejas para kits, los carros de plantillas y mucho más. -
ESD Meters & Monitors
Mida las tensiones estáticas que surgen de la acumulación electrostática.
Regístrese a nuestro boletín electrónico para ser el primero en conocer los nuevos productos, promociones y noticias de la industria.
Regístrese