M+A Matting 7841375100

Diamond-Plate Non-Conductive Military Switchboard Matting, Gray, 36" x 75' Roll

Envío gratuito

Switchboard mats are non-conductive mats designed for use in high voltage areas. Military Diamond Switchboards protect workers in high voltage areas.

Meets strict military specification standard MIL-DTL15562G
Type III - PVC runner
Dielectric strength: the floor covering shall not fail at less than 30,000 volts when tested as specified - MIL-DTL15562G
3/16", non-conductive

USD 1,699.95

Saltar al final de la galería de imágenes

Saltar al comienzo de la galería de imágenes

Documentos técnicos

Warranty

M+A Matting Product Warranty

Product Info & TDS Sheets

M+A Matting Switchboard Product Information

Detalles

Specifications

Material: PVC (vinyl)

Thickness: 3/16 inch (0.1875")

Standards & Testing:

Voltage Test MIL-DTL-15562G, Min. 15,000V for 1 Minute, Pass
Dielectric Strength Test MIL-DTL-15562G, Min. 30,000V, Pass
Visual/Dimensional Exam MIL-STD-407, Any Visual Degradation, Pass
Tensile Strength ASTM D412 DIE C, Min. 800PSI, Pass
Ultimate Elongation ASTM D412 DIE C, Min. 75%, Pass
Permanent Set ASTM D412, Max. 25%, Pass
Hardness ASTM D2440, 95+/-5(Shore A), Pass
Immersion Test FED-STD-601 Method 6121, Min. 70% of Original Tensile Strength, Pass
Oxygen Bomb Test FED-STD-601 Method 7111, Min. 80% of Original Tensile Strength, Pass
Light Aging ASTM D750, Min. 65% of Original Tensile Strength, Pass
Flame Resistance MIL-STD-1623, Char Length Max. 10in. Combustion Time 4.0 Min, Pass
Abrasion Resistance ASTM D1242, Max. Mils Lost 10, Pass
Flexibility Test FED-STD-501 Method 3111 Shall Pass, Pass
Dimensional Stability Test ASTM D1204, +/-0.020 IN/FT, Pass
Gloss Test ASTM D2457, 50, Pass
Color FED-STD-595, As Specified, Pass

Cleaning Instructions

Switchboard mats can be cleaned by scrubbing with a deck brush (when needed) using detergent with a neutral pH, and rinsed with a hose or pressure washer. Mats should be laid flat or hung to dry.

Más información

Más información
SKU	I309122
Modelo del fabricante	7841375100
UPC/EAN	096801434854
Marca	M+A Matting
Propiedades ESD	No conductivo
Ancho	3'
Longitud	Rollo de 75'
Espesor	3/16"
Superficie	Placa de diamante
Material	PVC
Color	Gris